BORI Self-aligning Ball Bearing 2322 1322 1222 2321 1321 2221 1221 2320 1219 1319 2319
Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle α is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
BORI angular contact ball bearings are produced in a wide variety of designs and sizes. Those commonly used and included in this catalogue are
| – | single row angular contact ball bearings |
| – | double row angular contact ball bearings |
| – | four-point contact ball bearings |
adapter sleeves are slotted and are supplied complete with lock nut and locking device. The adapter sleeves for use with sealed self-aligning ball bearings are equipped with a special locking washer that has a protrusion on the side facing the bearing, in order to prevent the seal from being damaged. These sleeves are identified by the suffix C.
To facilitate procurement and to provide the correct bearing/sleeve combination, offers the most popular self-aligning ball bearings together with the suitable adapter sleeve as a kit.
The range of these kits is shown in the table.
| self-aligning ball bearings/adapter sleeve kits |
|
|
|
|
| Bearing kit | Parts | Shaft |
| Designation | Designation | diameter |
| Bearing | Sleeve | (mm) |
|
| KAM 1206 | 1206 EKTN9/C3 | H 206 | 25 |
| KAM 1207 | 1207 EKTN9/C3 | H 207 | 30 |
| KAM 1208 | 1208 EKTN9/C3 | H 208 | 35 |
|
|
|
|
| KAM 1209 | 1209 EKTN9/C3 | H 209 | 40 |
| KAM 1210 | 1210 EKTN9/C3 | H 210 | 45 |
| KAM 1211 | 1211 EKTN9/C3 | H 211 | 50 |
Pictures:
